Pump Hayward HCP40753E1 KAN760 T2.B (Spain)

Hayward HCP40753E1 self-priming centrifugal pump with pre-filter for commercial swimming pools. Used for water filtration and circulation. The HCP range has been developed by Hayward as a reliable alternative to heavy duty cast iron and bronze pumps for commercial applications. Manufactured from lightweight, durable thermoplastic enriched with glass fibre. Noryl hydraulic components allow the pumps to be used in saltwater and seawater applications. Equipped with large capacity pre-filter. Transparent pre-filter cover on 4 stainless steel easy-release screws. The pump uses a TEFC high power cooled motor. Model 400/700V. Recommended for swimming pools up to 418,000 litres.

Hayward HCP 4000 series commercial pool and spa pumps. Designed as an alternative to heavy duty cast iron and bronze pumps. The HCP40753E1 pump provides powerful delivery of water in the water exchange and filtration circuit. The hydraulic pump capacity is 104 m³/h at a nominal water column (height) of 10 m. The maximum pump capacity is approx. 120 m³/h at minimum height of the water column. The model is optimally suited for filtration of swimming pools up to 450,000 litres (recommended up to 418,000 litres). TEFC (totally enclosed fan-cooled motor) with 7.0 kW (7.5 HP). Designed for connection to 3-phase 400/700 V mains. Number of revolutions 2850 per minute, 50 Hz. Pre-fitted with suction and discharge openings with 110 mm threaded ends for bonded joints with pipe. Water protection and insulation classes F, IP55.

Pump HCP40753E1 has an integrated pre-filter unit with 14,000 ml pre-filter basket. The lid of the pre-filter is made of transparent polymer and is secured by 4 stainless steel bolts with plastic caps. Base of screws is brass. The lid opens with a hinged screw mechanism. No wrenches or tools required. The prefilter basket with handle is made of white polymer and allows for quick cleaning of the unit from leaves and other debris. The pump casing and main components are made of fibreglass reinforced thermoplastic. The pump's hydraulic turbine is made of reinforced noryl. The pump can be used in saltwater environments. Supplied on integrated platform. Elevated base plate enhances cooling of the unit during continuous operation.

• Casing: heat resistant plastic + fibreglass
• Impeller: Noryl
• Motor: Sealed, self-cooling
• Protection class: IP55
• Insulation class: F
• Motor speed: 2850/min
• Frequency: 50Hz
• Current: 12.1/7.0A
• Pre-filter: 14 litre with transparent cover with 4 screws
• Stand: Raised base for improved ventilation
• The manufacturer reserves the right to change the scope of supply, design and specifications at any time without notice.

24 months warranty. The guarantee is subject to the condition that regular maintenance is carried out and the consumable parts are replaced in good time. When installing the pump, an optional motor protection switch is required.